Adding a Correction Integrity Report Image

There are two ways you can add a Correction Integrity Report Image to the system:
To add a new Correction Integrity Report Image (with no report setup information specified):
  1. Open the Correction Integrity Report application.
  2. Click the Add Icon or select Add from the Data Menu.
    The Add Image dialog box is opened.
  3. In the New Image name box, enter a name for the new Image.
  4. Deselect the Copy from image check box.
  5. Click OK.
To add a new Correction Integrity Report Image using information from an existing Image:
  1. Open the Correction Integrity Report application.
  2. In the Available Images list, select the Image you wish to use as a basis for the new Image.
  3. Click the Add Icon or select Add from the Data Menu.
    The Add Image dialog box is opened.
  4. In the New Image name box, enter a name for the new Image.
  5. Verify that the Image name displayed in the Image being copied box is the Image you have selected
    in the Available Images list.
  6. Select the Copy from Image check box.
  7. Click OK.

Back